2015-2020 F-150 EcoBoost Dual Exit Catback Exhaust

Dual Exit Sound And Flow For Every EcoBoost F-150 Configuration

This 3 inch dual exit catback exhaust system is built for the 2015 to 2020 Ford F-150 with the 2.7L or 3.5L EcoBoost V6. Constructed from mandrel bent T304 stainless steel, the system replaces the factory single or dual outlet catback section with true dual exit piping that increases flow and gives the EcoBoost a deeper, more resonant tone under boost. Thermal R&D tunes the muffler with its True Helmholtz Technology to keep highway drone under control while preserving an aggressive note under acceleration. The system mounts to the factory catalytic converters and OEM hanger locations, so there is no cutting or welding required, and it is available across every F-150 cab and bed configuration with polished or black ceramic coated tip finishes.

Key Features

• 3 inch mandrel bent T304 stainless steel dual exit catback construction
• True Helmholtz Technology muffler tuning controls highway drone under boost
• Available in polished or black ceramic coated tip finishes
• Sized specifically for Single Cab, Super Cab, and Super Crew cab and bed combinations
• Bolt on install to OEM catalytic converters and hanger locations, no cutting or welding required
• Backed by Thermal R&D’s lifetime manufacturer warranty

Fitment Table

Specifications

What’s Included

• Dual exit catback exhaust assembly sized to your selected cab and bed configuration
• Polished or black ceramic coated exhaust tips, per selected option
• All hardware and clamps needed for a complete install
• Installation instructions

About Thermal R&D

Thermal R&D designs and builds its exhaust systems in Lancaster, California, focusing on flow gains and a controlled exhaust note rather than raw volume. The company’s True Helmholtz Technology muffler tuning is used across its catback and frontpipe back lineups to reduce cabin drone at cruising speed while preserving an aggressive tone under acceleration. Every Thermal R&D exhaust system, including this F-150 EcoBoost dual exit catback, carries a lifetime manufacturer warranty and is built from mandrel bent T304 stainless steel for long term corrosion resistance.

FAQ

What is the B925 through B928 series catback exhaust?

The B925-C926, B926-C926, B927-C926, and B928-C926 part numbers are Thermal R&D’s dual exit catback exhaust systems for the 2015-2020 Ford F-150 EcoBoost, sized differently to match each cab and bed length combination.

How do I know which part number fits my F-150?

Each part number in this series corresponds to a specific cab and bed length combination, so confirm your Single Cab, Super Cab, or Super Crew configuration and bed length before ordering, or select the matching option on this listing.

Does this catback fit both the 2.7L and 3.5L EcoBoost engines?

Yes, this dual exit catback series is built to fit both the 2.7L and 3.5L EcoBoost V6 engines across the 2015-2020 F-150 lineup.

Does installing this catback require any cutting or welding?

No. The system connects at the factory catalytic converter outlets and uses the OEM hanger locations, so no cutting or welding is required.

Will this catback trigger a check engine light or emissions code?

No. The system retains the factory catalytic converters and does not alter any emissions componentry, so it should not trigger emissions related codes.

What is the difference between the C926 and C926-C part numbers?

Both use the same mandrel bent T304 stainless steel construction and Helmholtz muffler tuning. The C926-C parts come with black ceramic coated tips, while the C926 parts come with polished tips.

How much drone will I hear on the highway with this catback installed?

Thermal R&D tunes this catback’s muffler with True Helmholtz Technology specifically to cancel resonant drone frequencies, so most owners describe a controlled cruising tone with more character showing up under boost.

Does this catback come with a warranty?

Yes, this F-150 EcoBoost dual exit catback is backed by Thermal R&D’s lifetime manufacturer warranty against defects in materials and workmanship.

Install Instructions

1. Allow the exhaust to cool fully, then raise the F-150 on a lift or jack stands with adequate working clearance.
2. Remove the factory catback exhaust starting at the catalytic converter connection, releasing the factory hanger isolators as you move toward the rear.
3. Test fit the new catback at the catalytic converter connection point, leaving all clamps loose for adjustment.
4. Route the remaining sections through the factory hanger locations, centering the dual exit tips within the rear bumper opening.
5. Adjust the tip alignment and overall system position before tightening any connections fully.
6. Tighten all clamps to the specified torque, start the vehicle, and check every joint for leaks before returning it to service.